Introduction to Panic Alarms
The purpose of a panic alarm is to allow an individual under duress to quickly and silently call for assist in the occasion of an emergency. Panic alarms are additionally called "duress alarms", "hold-up alarms", or "panic buttons".
Panic alarms are used when it could also be unsafe or uncomfortable to call for assist in other ways. For example, if a belligerent individual is standing in your lobby, it could also be unwise to further escalate the situation by picking up a phone to call for assistance. A panic alarm can provide a quick and convenient way to summon assist without drawing attention.
Silva Consultants feels that just about every enterprise can benefit from the usage of panic alarms. Locations where panic alarms may be particularly beneficial include:
Receptionist's desks in building lobbies.
Security stations and checkpoints.
Customer support counters.
Check-out counters and cashier's stations.
Rooms where cash or different valuables are obtained, processed, or stored.
Interview rooms in Human Resources department.
Executive office suites.
Places the place confrontations with the public are likely to occur.
Parts of a Panic Alarm System
Panic alarms encompass two primary components:
The panic button is the machine that the particular person activates when she or he wants help. There are lots of styles of panic buttons available. These can have a single pushbutton, two pushbuttons that should be pressed concurrently, gadgets that must be squeezed, and gadgets which are activated by a foot or knee. There are also gadgets that can be covertly activated when cash or a product is removed on the request of a robber. Most panic buttons are specifically designed to withstand unintentional activation.
Panic buttons are normally put in in a location the place they'll simply be reached, but out of view of the casual observer. In lots of cases, panic buttons are installed on the underside of a desk or counter-top.
Panic buttons might be the wired type or wireless type. Wired panic buttons are related using cabling. Wired panic buttons are very reliable, however it can sometimes be troublesome and costly to get cable to every panic button location.
Wireless panic buttons use a short-range radio transmitter, similar to that used with a garage door opener. Wireless panic buttons are easy to install and might be placed just about anywhere. Wireless panic buttons can be carried round on the premises by staff if desired. Wireless panic buttons require batteries and need to be tested regularly to guarantee that they are operating properly.
The communications system is the method that's used to summon help when a panic button is pressed. The type of communications system used depends largely on the resources available on the facility the place the panic alarm is being put in and the level of security threat.
Types of communications systems used can include:
Communications to an off-site alarm monitoring heart:
This method would typically be used at facilities that do not have an on-site security employees, corresponding to at a small business. The panic buttons can be connected to an alarm control panel which sends a signal to the monitoring heart when a panic button is pressed. The alarm monitoring heart would then call the police or different appropriate individuals to reply to the site.
Communications to security control middle:
Most massive firms have some type of centralized security monitoring and management heart, either on-site, or at a central location somewhere within their organization. When this type of resource exists, panic buttons are typically monitored on the management center. Most often, panic buttons are related to the organization's access management and security administration system, which transmits the alarm to the control center.
When a panic button is pressed, it sounds an alarm within the security control center. The center would then dispatch native security officers and/or the police to reply to the site.
Communications to non-security personnel:
Some organizations that wouldn't have on-site security choose to inform non-security personnel when a panic button is pressed. Often, the group will type a "response team" consisting of staff from a number of departments (Facilities, HR, etc.) and ask that these employees reply when a panic button is pressed.
There are various systems that can be used to inform the response crew when a panic button has been pressed. These embody can embody overhead paging systems and gadgets that ship voice messages, text messages, or e mail messages directly to smartphones.
For those who have virtually any queries about exactly where and how to employ Signal from workplace panic button, you are able to call us from our web site.
Forum Role: Participant
Topics Started: 0
Replies Created: 0